Daily maintenance of laser marking machine

As an industrial processing equipment, the hardware of the laser marking machine is constantly working, which can cause wear and tear over time. It is necessary to maintain good performance and extend the working life of the laser marking machine equipment through regular maintenance and upkeep. Below, the Saishuo editor will share with you some daily maintenance of laser marking machines.

Daily maintenance of laser marking machine:

1、 Daily use of laser marking machine

1. When the laser marking machine is turned on, confirm whether there is any deviation in the height position of the lifting mechanism guide rail.

2. Before using the laser marking machine, check if there are any changes to the software settings, and follow the steps for turning it on and off.

3. When completing the work and shutting down the laser marking machine equipment, it is necessary to turn it off one by one to avoid equipment failure caused by improper operation.

2、 Daily inspection of laser marking machine

1. The laser marking machine needs to clean the field lens regularly. Before use, it can be cleaned with a cloth mixed with a small amount of alcohol, paying attention to wiping in one direction.

2. Regularly clean the laser marking machine to avoid accelerating aging. You can use an air gun to blow along the air duct and clean the relevant circuit boards inside the chassis.

3. Regularly check whether the fan of the laser marking machine is running normally. If it cannot operate normally, please replace it in a timely manner.

4. Check the buttons of the laser marking machine to see if all indicator lights are displaying normally

If there are any equipment problems that cannot be detected by oneself, the supplier can be invited to provide on-site after-sales service.